Izdelki za oprema za laserje (252)

AMETEK EMC bridges the technology-solution gap that often exists between big ideas and successfully manufactured products.

Dual Gentle LASEST technology opens up new possibilities for specialists in the field of laser gynecology and intimate plastic surgery. A feature of this technology is the use of an innovative manipulator that allows the doctor to choose the type of distribution of laser radiation necessary ​​flat, radial, pixel or combined. The handpiece has a special graduated scale and fixed rotary positions, which increases accuracy and accuracy during the procedure. The gynecological handpiece can be used with two laser modules Er YAG Active and Nd YAG 1320 nm, which significantly expands the therapeutic range and effectiveness of the Dual Gentle technology. All LASEST gynecological accessories are made of special materials that can be sterilized repeatedly and used accordingly without risk to the health of patients Active element:Nd: YAG / Er: YAG Radiation length:1320/2940 nm Pulse duration:300-5000 us Maximum power:55 W Maximum energy density:200 J/cm2 Maximum energy:up to 45 J Maximum peak power:About 15 kW Frequency of operation:1-6 Hz Outlet Diameter:Flat/radial/pixel/hybride Nozzle weight:0.65kg

The Diode 3 Max LASEST рair removal diode laser is the most advanced laser diode tip in its class. This diode module has advanced energy and spectral characteristics, due to which it combines the three main wavelengths for laser hair removal – 755, 808 and 1064nm. The wavelength of 755nm penetrates the skin by 1.52mm and is absorbed to the maximum by the pigment melanin, which is contained in the hair. The wavelength of the laser diode 808nm has a maximum photothermal effect on the hair shaft and its follicles. And the wavelength of 1064 nm, which is able to penetrate the skin to a depth of 45 mm, has a coagulating effect on the network of capillaries that feed the follicles and thus stop the restoration of damaged hair. Thanks to the combination of all three wavelengths in one diode laser, the number of procedures required to completely stop the hair is significantly reduced, because a complex effect of three independent factors during the laser hair removal procedure. Active element:Diode laser Radiation length:755/808/1064 Pulse duration:5-200ms Maximum power:1600W Maximum energy density:400 J/сm2 Maximum energy:150J Maximum peak power:up 3 кW Frequency of operation:1-10 Hz Outlet Diameter:12х15mm Nozzle weight:1.4kg

PULLALIGN is an easy to handle laser alignment system to simply but efficiently align pulleys. Pulley alignment reduces wear of the pulleys, increases machine efficiency, extends the planned maintenance intervals, und finally leads to cost and energy savings.

Co2 Fractional laser Functions: Skin resurfacing: Rough skin, acne skin, coarse pores, dark skin. Wrinkle removal: stretch mark removal, crow's feet, head lines, eye wrinkle removal. Scar repair: hypertrophic scar, burn scar, sunken scar.etc Vaginal care: vaginal tightening, gynaecopathia treatment, etc Advantage: Korea imported 7 joint arm for smart and flexibale operation USA Coherent Laser (RF laser) Door to door shipment More video and information please contact: elaine@mbt-laser.com Whatsapp: +8618500093806

Die Schneidmaschine M-1600 für Acrylglas bietet Schneid- und Gravuranwendungen für höchste Ansprüche. Durch die optionale Ausstattung mit dem eurolaser Shuttletisch-System lässt sich die Produktivität sogar noch weiter steigern und das bei einer Bearbeitungsfläche von 1,330 mm x 1,630 mm. Diese Kombination eignet sich besonders für das Schneiden von Acryl, Plexiglas® oder Perspex®. Der bedarfsorientierte, modulare Aufbau der eurolaser Lasersysteme ermöglicht eine an jede Anforderung speziell angepasste Konfiguration und bietet gleichzeitig die erforderliche Flexibilität. Der Aufbau der Maschine orientiert sich vorwiegend an den Erfordernissen, die sich aus der späteren Nutzung ergeben. Arbeitsfläche (BxL)::1.330mm x 1.630 mm Abmessungen (BxLxH)::2,730 mm x 2,410 mm x 1,600 mm Materialdurchlassbreite::1.642 mm Tischdurchlasshöhe::15 - 55 mm (ohne Materialträger) Laserleistung::60 bis 650 Watt Geschwindigkeit::1 - 1,414 mm/s (in 1 mm Schritten) Beschleunigung::max. 14,1 m/s²

Ob Autogen, Unterwasser- oder Trockenplasma, ob Senkrecht-, Fasenschnitt oder mit Bohraggregat, die OmniMat® ist die ideale Lösung für große Arbeitsbereiche und härteste Produktionsbedingungen.

Die Schneidmaschine M-1600 für Holz bietet Schneid- und Gravuranwendungen für höchste Ansprüche. Durch die optionale Ausstattung mit dem eurolaser Shuttletisch-System lässt sich die Produktivität sogar noch weiter steigern -und das bei einer Bearbeitungsfläche von 1330 x 1630 mm. Diese Kombination eignet sich besonders für das Schneiden von Holz, MDF, Sperrholz. Der bedarfsorientierte, modulare Aufbau der eurolaser Lasersysteme ermöglicht eine an jede Anforderung speziell angepasste Konfiguration und bietet gleichzeitig die erforderliche Flexibilität. Der Aufbau der Maschine orientiert sich vorwiegend an den Erfordernissen, die sich aus der späteren Nutzung ergeben. Arbeitsfläche (BxL)::1.330mm x 1.630 mm Abmessungen (BxLxH)::2.730 mm x 2.410 mm x 1.600 mm Materialdurchlassbreite::1.642 mm Tischdurchlasshöhe::15 - 55 mm (ohne Materialträger) Laserleistung::60 bis 650 Watt Geschwindigkeit::1 - 1,414 mm/s (in 1 mm Schritten) Beschleunigung::max. 14,1 m/s²

Materialien – Das Metallographielabor umfasst Gerate zur metallographischen Probenvorbereitung, ein 500-fach optisches Mikroskop, ein Programm zur Bildgebung und Analyse der Kornstruktur sowie Hartemessgerate.

It’s designed upon you weld cylindrical, conical and rectangle shaped bended frameworks and in shape of flat slab metal sheet and plaque linearly. Frameworks that are between 200-3000 mm diameters can be welded on different types of machines easily. Its production can be made from the length of 0.5 meter to 4 meters. Upon customer demand the length can be increased. As to application method, TIG, MIG and submerged welds can be adapted. Materials’ like boiler, thermosiphon, solar power boilers, cooling tanks, natural gas funnels, lpg tubes etc., height welds are made on this machine.

The Frame Welding Machine is made of welded parts of different sizes and is designed to obtain the desired special H profiles. The machine body and the welding heads are fixed and the workpiece provide to be welded on both sides of the part to be welded by moving by means of driven conveyors. The hydraulic cylinders in the system provide the positioning of the H profile placing and fixing during welding.The system has adjustable backrests and accessories for the roofing of the conveyor group.The system has a hydraulic piston loading unit. The system might turn beam 90 degree with maximum weight and maximum dimensions by means of chain or mechanical structure.

Er YAG Active LASEST module is widely used for most ablative procedures in aesthetic medicine. The radiation wavelength is 2940 nm, which corresponds to the maximum peak of water absorption, so the depth of direct optical radiation penetration into the skin of this laser module is only 0.01 – 0.1 mm, which guarantees very high accuracy and the absence of side effects like with more “hard” ones CO2 laser. The Er YAG Active laser module can operate in a wide range from ultrashort (from 100 μs) to ultralong (50 ms) pulses depending on the selected mode or technique. An ultrashort pulse allows “cold” surface grinding without heating the lower layers of the skin, which is ideal for correcting agerelated manifestations, scars and postacne. The ultralong impulse promotes the deepest possible laser heating, due to which stimulation of own collagen cells, structural changes in the dermal layer occurs, improving skin texture, smoothing scars, reducing agerelated skin changes Active element:Er: YAG Radiation length:2940 nm Pulse duration:300-50000 us Maximum power:15 W Maximum energy density:150 J/cm2 Maximum energy:to 7 J Maximum peak power:About 8.5 kW Frequency of operation:1-6 Hz Outlet Diameter:1, 3, 5mm, 3dPixel Nozzle weight:0,5 kg